How to upgrade firmware

LINKPI HD VIDEO ENCODE
1
  • Note that this is not the same as flashing, which can resolve many issues, whereas upgrading may not.

If you need to flash the device, please refer to the following link.
https://forum.youyeetoo.com/t/how-to-flash-the-device/341

To perform the upgrade, follow these steps:

  1. Download the Latest Upgrade Package: First, ensure you have the correct and most recent upgrade package for your device. Pay attention to the compatibility range of the update package – typically, downloading the latest version is advisable. Make sure to select the package that corresponds to your specific device model.
  2. Access the Encoder’s System Settings Page: Log into your device’s administration interface through its web browser interface. This is usually done by entering the device’s IP address into your browser.
  3. Upload the Upgrade Package: Within the system settings, look for the option to upgrade or update firmware. Choose the downloaded upgrade package and initiate the upload process.
  4. Wait for Upload Completion: After initiating the upload, wait patiently until the progress bar reaches 100%. It’s essential to further wait until you receive a confirmation message stating that the upload was successful, even if the progress bar is full.
  5. Restart the System: Once the upload is confirmed successful, restart the device. In some cases, the system might require two restarts to fully implement the changes from the upgrade package.
  6. Post-Upgrade Access: Typically, the upgrade process should not alter your previously set IP address. You should be able to continue accessing the device using the same IP as before.
  7. Handling Multi-model Upgrade Packages: If the upgrade package supports multiple device models and the default model after the upgrade doesn’t match your purchased product, you’ll need to manually adjust it. After logging in post-upgrade, visit http://IP/fac.php in your browser, where IP is your device’s IP address. From there, select and switch to the model that corresponds to your device. Remember to restart the device again after switching the model.

By following these instructions carefully, you should be able to successfully upgrade your device’s firmware, ensuring it operates with the latest features and improvements.

2

Upgrade Package

update_20240531

This update is exclusively applicable to versions from 20240131 onwards. For devices running earlier versions, please download and use the designated flashing firmware to perform the upgrade.

After updating to this version, if downgrading becomes necessary, ensure to employ the appropriate downgrade firmware package corresponding to your desired version. Directly using the upgrade package of a lower version, such as that from 20230426, for downgrading is strictly discouraged.

Key Enhancements Include:

  • Standard Edition: A new feature has been added to the decoding settings page – the ability to receive live streaming, now with support for authenticated streaming.
  • ENCSHV2 Model: An issue has been rectified where, post-flashing, the WiFi would default to being enabled upon the first boot-up.
  • Optimized Frame Synchronization: The frame synchronization function has undergone optimizations to enhance stability and performance.

Please proceed with caution during the update process and follow all provided guidelines to ensure a smooth transition to the latest features and improvements.

3

ENC1
ENC1V2
Download Address

4

ENCSH
Download Address
ENC2
ENC5
ENC9
Download Address

5

ENC2V200
ENC4
C3531DV200
Download Address

6

ENC1V3
ENC4S
ENCSHV2
Download Address

7

ENC5V2
ENC2V2
ENC4
ENC8
Download Address

11

Online update

image
image1856×916 61.4 KB

image
image1125×546 24.4 KB