Youyeetoo X1 SBC Specification


Item descriptions
CPU: Intel® Celeron 11’th Gen Jasper Lake N5105 (CPU Frequency: 2.0~2.9GHz,Quad-core 10nm TDP 10W)
GPU: Intel®UHD Core Graphics(Frequency:450 - 800MHz)
Memory: Onboard 4GB / 8GB /16GB LPDDR4 (optional) recommend 8GB
Storage: eMMC(V5.1): 0/64G/128G/256G optional
M.2 Slots :NVMe 2280 SSD(PCIE3.0) or M.2 SATA 2280 SSD
(Support PCle Gen 3.0 x4 lanes NVMe 1.4,compatible with PCle Gen 3.0 x2 NVME)
SATA FPC Slots:SATA3 hard disk can be expanded through SATA adapter board(need SATA adapter board)
Micro SD(TF) : Supports common SD cards to Extended storage
network: Ethernet: RJ45 Gigabit Ethernet * 1
Wireless: WIFI5+BT5.0 / WIFI6+BT5.2 Expansion via M.2 slot, optional
4G LTE: M.2 E-key slot expansion,4G datamodule such as the EC20/EC25(need 4G adapter board)
(Multi screen) HDMI:HDMI2.0 4K/60Hz
Micro HDMI:HDMI2.0 4K/60Hz
MIPI FPC :Support Youyeetoo MIPI7LCD(1024 * 600 ) LCD module Multi TOUCH
USB USB-A: USB2.0 * 2
USB-A: USB3.0 * 2
USB Pin: USB2.0 * 2
Audio Output 3.5 Headphone jack(4line),headset with MIC
SPK XH2.0 PIN: Onboard 3W power amplifier,matching 8 ohm speakers
HDMI Audio Output (Audio can be output to TV via HDMI)
Audio Input Onboard digital microphone MIC:with noise reduction function(default)
Analong MIC: XH2.0 PIN, 3.3V connected to analog microphone head(Switch MIC lnput needs to replace BlOS)
M.2 Socket M.2 M Key: NVME SSD/M.2 SATA SSD (M-key) 2280
M.2 E Key: WIF15+BT5.0/WIFI6+BT5.2 Module 2230 or 4G adapter board to support 4G LTE module (E-key)
UART UART TTL * 3 serial port , Connect RS232 or RS485 /CAN modules can also be use
I2C IIC * 1 XH2.0 4PIN,Provide windows/linux operation example tutorial Default 3.3V
SPI SPI* 1 XH2.0 5PIN,Provide windows/linux operation example tutorial Default 3.3V
GPIO GPIO * 5 XH2.0 6PIN,Provide windows/linux operation example tutorial Default 3.3V
LED light Onboard LED * 2,Parallel 4PIN pin lead, Default 3.3V (defaultred flashes and green off)(Provide a tutorial API interface to control the on-off or heartbeat flickering)
key Power key * 1 Reset key * 1(restore BIOS setting)
RTC RTC battery Seat : SH10 2PIN CR2032 button battery or other 3.3V battery
RTC consumes about 35mAh per year
Auto Power-on Turn on * 1 without pressing the power button(can be set in BIOS)
Power 12V DC socket: Recommended power adapter 12V3Aor XH2.54 2PIN Power socket
Dimension 115 * 75 mm
Heat sink FAN seat specification:SH1.0 4PIN Default heatsink fan 5V/0.2A power Consumption
Multi OS Windows 10/11Linux ubuntu / Linux Debian
NFC NFC transmission with mobile phones/Card Reader, Compatible with android/lOS phones, provides examples
Intel watchdog Standard windows API support
CPU temperature Standard windows API support
Fan speed Standard windows API support Fan speed requlation
POE Support AC/BT protocol 30W POE module, 60W support can be customized (Need POE module)