Youyeetoo R1(ARM SBC)

The youyeetoo R1 is an embedded Single Board Computer (SBC) designed by for the AIOT (AI of Things) market. Despite its compact size, it boasts powerful features, powered by the flagship RK3588s octa-core 64-bit processor from Rockchip, built on an 8nm process, with a high clock speed of up to 2.4GHz. It integrates an ARM Mali-G610 MP4 GPU and features a built-in NPU (Neural Processing Unit) with 6 TOPS (Trillions of Operations Per Second) of AI computing power.It has faster speeds and lower power consumption, making it suitable for a wide range of AI application scenarios.

Although the R1 SBC is only the size of a card (100*69.3mm), but it has a rich interfaces, including Gigabit Ethernet, HDMI output (supports 8K), Type-C, M.2 PCIe2.0, dual MIPI cameras and screens, 3 x USB2.0, 1x USB3.0, 4 x UART serial port, 2 x I2C, GPIO x 7, SPI x1, ADC x2, CAN x1 and other common interfaces for the AIOT(Internet of Things),it support multiple operating systems and can be applied to Edge computing, artificial intelligence, advertising machines, smart homes and other AIoT fields.

The most distinctive feature is that the R1 SBC is also equipped with an NFC(near-field communication) chip. You can use a mobile phone (android/IOS) to touch the motherboard to transfer data to each other, the youyeetoo team provides application example tutorials.


Item descriptions
CPU Rockchip RK3588S (8nm LP process),8-core 64-bit,4xCortex-A76 and 4xCortex-A55,Up to 2.4GHz frequency
GPU ARM Mali-G610 MP4 “Odin” GPU
● Compatible with OpenGL ES 1.1/2.0/3.1/3.2
● OpenCL 1.1,1.2,2.0
● Vulkan 1.1,1.2 450 GFLOPS
● 3D and 2D graphics engine
NPU Built-in AI accelerator NPU with up to 6 TOPS, supports INT4/INT8/INT16 mixed operation
(TensorFlow/MXNet/PyTorch/Caffe RKNN support )
RAM LPDDR4 4GB/8GB/16GB/32GB (option)
Storage ● eMMC: 32G/64G/128G/256GB (option)
● M.2 M-Key slot :
1. Support PCIe NVMe SSD (defaul) 2242
(ps:The speed is PCIe 2.0)
2.SATA3.0 SSD mSATA 2242
● MicroSD (TF) Card Slot
Network ● Ethernet:RJ45 10/100/1000Mbps Ethernet
● Wireless: M.2(E-Key) Socket Expansion Slot
1. Wi-Fi5+BT5.0 module(RTL8822CE) default driver
2. WI-FI6+BT5.2 dual-band WiFi+BT module
●4G LTE: M.2(M-Key)Socket Expansion Slot
(default driver for EC20/EC25 4G LTE Data)
(Need a 4G adapter board)
(video Codec)
Video decoding:
● 8K@60fps H.265/H.264/AV1/VP9/AVS2
● 8K@30fps H.264
● 4K@60fps AV1
● 1080P@60fps MPEG-2/-1/VC-1/VP8
Video encoding:
● 8K@30fps H.265 / H.264 encoding
(Up to 32-channel 1080P@30fps decoding + 16-channel 1080P@30fps encoding)
(Multi screen)
● HDMI: 1 x HDMI2.1 (8K@60Hz or 4K@120Hz)
default driver the MIPI7LCD (1024 * 600 LCD touch screen)
● DP: 1 x Type C for DP1.4 (8K@30Hz)
Camera MIPI FPC slots :2 x MIPI CSI 4 lane (MIPI_CPHY0/MIPI_CPHY1)
USB ● USB-A :USB 2.0 * 2 (Limit 500mA)
● USB-A :USB 3.0 * 1 (Limit 1A)
● USB-C : TypeC * 1(USB3.1 OTG / DP1.4)(Limit 2A)
● USB socket:USB 2.0 * 1(4 pin header: PH-4A 2.0mm )
Audio Output 1. 3.5mm audio jack x 1 (with mic)
2. HDMI audio output
3. 4 pin headerJ368:R/L/GND/MIC (header:SH1.25mm)
(The signal is parallel to the 3.5 audio jack)
Audio Input 1. 1.Microphone x1 (On board )
2. MIC socket:2pin header for MIC 3.3V(1.25mm SH1.25)
3. 3.MIC in 3.5mm audio jack
M.2 Socket ●BOTTOM M.2 2242 M-key:PCle Gen 2.0 lane 2
support 4G LTE (need M.2 to MiniPCIE adapter board)
●TOP M.2 2230 E-key:Support module(WIFI5+BT5.0 / WIFI6+BT5.2)
30PIN Socket
●I2C:I2C * 3 (I2C1、I2C3、I2C7) default 3.3V
●UART:UART * 3(UART5、UART7、UART9) default 3.3V
●CAN:CAN * 1 (need CAN conversion board )
●PWM:PWM * 1(PWM7)
●ADC: ADC * 2(ADC3、ADC4)
● GPIO:GPIO pin * 7 default 3.3V support 1.8V(need change BIOS)
●VCC:VCC * 2(VCC3v3、VCC5v)
●SPI(pin:14,16,19,21,23) Reuses I2C7 and UART9
Debug port Debug UART * 1 (UART2 3P SH1.25)
LED light LED * 2 red/green,4 Pin out socket ,parallel,(Programmable)
Button key * 4 :Boot/Reset /Recovery /Power
Power ● DC jeck : 12V(5.5x2.1mm,12V3A)
● DC jeck : 12V(5.5x2.1mm,12V3A)
● Pin socket red: 2Pin 2.54 pitch
RTC RTC Button battery socket :2Pin 1.25mm SH1.25
Size 100 x 69.3mm
NFC NFC near field communication, Connect an external antenna, you can Data transfer with mobile phone, android/iOS support provides examples tutorials and API
HDMI IN Maximum Support 4K@60Hz (YUV420 ) (option)
(Adapter board to the MIPI-CSI port: RK628D )
OS Support ● Android 13(kernel 5.10)
● Debian 11(kernel 5.10)
● Ubuntu 22.04(kernel 5.10)
1 Like