On the NanoPC-T6 which PIN of the Debug UART is closest to the EDGE of the BOARD, #1 or #3 ?
- Debug UART Pin Spec
3.3V level signals, 1500000bps
| Pin# | Assignment | Description |
|---|---|---|
| 1 | GND | 0V |
| 2 | UART2_TX_M0_DEBUG | output |
| 3 | UART2_RX_M0_DEBUG | intput |
I can not find the ORIENTATION (Pin #1) of the Debut UART on the PCB or Silkscreen
Thank you for your time and attention.
