We need to state a note:
The device’s NDI has a 30-minute free trial time. After 30 minutes, you can restart the device and try again. Therefore, you must test the NDI first and confirm that it is satisfactory. Then ask us to authorize it. It’s also a responsible thing for yourself.
Because this is a virtual item, once the authorization is issued, this service cannot be returned, thanks for kindly understanding!
Authorization process:
First, we assume that the device IP is: 192.168.1.217
Step 1: Log in to the device
Through the browser (recommended Chrome kernel browser), visit http://192.168.1.217
The encoder is logged in by default. Account: admin, Password: admin
Step 2: Enter the authorization page, through google browser, pls visit http://192.168.1.217/ndireg.php , this is the defaulty address. If you changed for DHCP, please check the displayed address on LCD and use that.
Copy the serial number in the red box and send it to us, and then wait for us to make an authorization code for you. Normally, the authorization code will be given to you on the same day, unless the authorized technology is temporarily absent, it may be postponed for one day.
Step 3: Set the authorization code, Through google browser, visit http://192.168.1.217/ndireg.php, this is the defaulty address. If you changed for DHCP, please check the displayed address on LCD and use that.
We will send you these information.
Fill in the vendor name (Vendor name) and authorization code (Vendor id) , and then click Save, So ok.