MaskRom mode
See startup mode for an introduction startup mode
MaskRom pattern is the last line of defense equipment burn out. Forced entry MaskRom involved hardware operation, have certain risk, so only in the equipment into the Loader mode, can try MaskRom mode.
Please read carefully and operate carefully!
The operation steps are as follows:
- Disconnect the device from the power supply
- Hold the BOOT button on ITX-3588J or tweeze the two test points on Core-3588J (both shown below)
- The device is plugged into the power supply and powered on
At this point, the device enters MaskRom mode.
- Enter MaskRom using ITX-3588J
- Enter MaskRom using Core-3588J
At this point, the device should go into MaskRom mode.
