I bought the ENC1_V3 encoder. I cannot connect to it. The IP address is 192.168.1.217 but my wifi network is 192.168.68.x
I want to plug in a USB Mic into the encoder. How do I set it up in the dashboard?
If you need to use the functions of the MIC, you can refer here.
Please note that the supported devices are limited.
Also, what is the purpose of accessing the microphone? If it’s to record the sound of a usb markwind, it’s not supported.
I don’t own a ENC1_V3 encoder but they sound pretty cool after reading the wiki. I think your question is a network related one you basically want to connect to the device but it has a different IP address than your wifi setup. What OS do you use Linux, Windows, Mac?
I think the easiest solution is to purchase or borrow a USB network adapter. Plug it into your device(laptop, miniPC, SBC…etc) and configure the NIC to be on the same “subnet” as the ENC1_V3 encoder [192.168.1.217] subnet=192.168.1.x …That way you don’t need to mess with your wifi on your device or router. When you’re done unplug the USB NIC and put it away for next time.
