{"users":[{"id":-1,"username":"system","name":"system","avatar_template":"/user_avatar/forum.youyeetoo.com/system/{size}/7_2.png","admin":true,"moderator":true,"trust_level":4},{"id":511,"username":"Ismet_Topal","name":"Ismet Topal","avatar_template":"/user_avatar/forum.youyeetoo.com/ismet_topal/{size}/1496_2.png","trust_level":2},{"id":4,"username":"CharlesChen","name":"lax","avatar_template":"/user_avatar/forum.youyeetoo.com/charleschen/{size}/202_2.png","moderator":true,"trust_level":2},{"id":513,"username":"asdem","name":"as dem","avatar_template":"/letter_avatar_proxy/v4/letter/a/bc8723/{size}.png","trust_level":2},{"id":502,"username":"abdelrahman_omar","name":"abdelrahman omar","avatar_template":"/user_avatar/forum.youyeetoo.com/abdelrahman_omar/{size}/1487_2.png","trust_level":2},{"id":501,"username":"stephenx","name":"Stephen","avatar_template":"/letter_avatar_proxy/v4/letter/s/73ab20/{size}.png","trust_level":2},{"id":498,"username":"Parsec3d","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/p/dec6dc/{size}.png","trust_level":2},{"id":494,"username":"0xB0D","name":"","avatar_template":"/user_avatar/forum.youyeetoo.com/0xb0d/{size}/1460_2.png","trust_level":2},{"id":483,"username":"Franco","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/f/e19b73/{size}.png","trust_level":2},{"id":101,"username":"Digicontrol","name":"Marco Maffeis","avatar_template":"/letter_avatar_proxy/v4/letter/d/7993a0/{size}.png","trust_level":2},{"id":478,"username":"DonF","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/d/ba9def/{size}.png","trust_level":2},{"id":470,"username":"YuriRzhanov","name":"Yuri Rzhanov","avatar_template":"/letter_avatar_proxy/v4/letter/y/f9ae1b/{size}.png","trust_level":2},{"id":465,"username":"rlo","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/r/838e76/{size}.png","trust_level":2},{"id":273,"username":"dadopts","name":"davide","avatar_template":"/letter_avatar_proxy/v4/letter/d/77aa72/{size}.png","trust_level":2},{"id":336,"username":"mdian","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/m/ac8455/{size}.png","trust_level":2},{"id":324,"username":"t_lar","name":"Trace","avatar_template":"/letter_avatar_proxy/v4/letter/t/cdc98d/{size}.png","trust_level":2},{"id":308,"username":"Sundog","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/s/d2c977/{size}.png","trust_level":2},{"id":319,"username":"terox93","name":"Terry Kay","avatar_template":"/user_avatar/forum.youyeetoo.com/terox93/{size}/1182_2.png","trust_level":2},{"id":153,"username":"Abdraimova_Gyuzel","name":"Abdraimova Gyuzel","avatar_template":"/user_avatar/forum.youyeetoo.com/abdraimova_gyuzel/{size}/773_2.png","trust_level":2},{"id":271,"username":"Galil","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/g/e5b9ba/{size}.png","trust_level":2},{"id":287,"username":"David","name":"David","avatar_template":"/user_avatar/forum.youyeetoo.com/david/{size}/1130_2.png","trust_level":2},{"id":2,"username":"monica","name":"Monica","avatar_template":"/letter_avatar_proxy/v4/letter/m/a183cd/{size}.png","moderator":true,"trust_level":1},{"id":264,"username":"inaraghj","name":"inaraghj","avatar_template":"/user_avatar/forum.youyeetoo.com/inaraghj/{size}/1072_2.png","trust_level":2},{"id":263,"username":"richardschoen","name":"Richard Schoen","avatar_template":"/user_avatar/forum.youyeetoo.com/richardschoen/{size}/1069_2.png","trust_level":2},{"id":259,"username":"Space_Max","name":"Space Max","avatar_template":"/user_avatar/forum.youyeetoo.com/space_max/{size}/1055_2.png","trust_level":2},{"id":247,"username":"kleberpaulo","name":"Kleber Paulo","avatar_template":"/user_avatar/forum.youyeetoo.com/kleberpaulo/{size}/464_2.png","trust_level":2},{"id":246,"username":"Kitty05","name":"Kelly Gloria","avatar_template":"/user_avatar/forum.youyeetoo.com/kitty05/{size}/1020_2.png","trust_level":2},{"id":243,"username":"Social","name":"social bee","avatar_template":"/letter_avatar_proxy/v4/letter/s/41988e/{size}.png","trust_level":2},{"id":239,"username":"Tom_Magnuson","name":"Tom Magnuson","avatar_template":"/user_avatar/forum.youyeetoo.com/tom_magnuson/{size}/1009_2.png","trust_level":2},{"id":230,"username":"softmax","name":"Max","avatar_template":"/letter_avatar_proxy/v4/letter/s/e79b87/{size}.png","trust_level":2},{"id":191,"username":"haolei123","name":"haolei","avatar_template":"/letter_avatar_proxy/v4/letter/h/eb8c5e/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/arm-single-board-computer/1?page=1","per_page":30,"top_tags":["FHL-LD19","Jetson-Nano","depth-camera","youyeetoo-x1","astra","astra-pro","canmv","Gemini","lidar","linkpi","orbbec","risc-v","Tang-20"],"topics":[{"fancy_title":"Welcome to Discourse","id":7,"title":"Welcome to Discourse","slug":"welcome-to-discourse","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-05-22T16:44:35.893Z","last_posted_at":"2022-05-22T16:44:36.025Z","bumped":true,"bumped_at":"2022-05-28T08:24:20.004Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"youyeetoo is a team which focus on hardware and software technology services about IoT/edge AI applications/robotics. We…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":370,"like_count":0,"has_summary":false,"last_poster_username":"system","category_id":1,"pinned_globally":true,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":-1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BY51 No NVME found","id":1339,"title":"BY51 No NVME found","slug":"by51-no-nvme-found","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-08-01T19:40:01.600Z","last_posted_at":"2026-08-17T01:17:32.620Z","bumped":true,"bumped_at":"2026-08-17T01:17:32.620Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My BY51 doesnt see my NVMe drive. Is there any BIOS settings? \nBIOS : ANB01_INTEL \nBIOS DATE:10/19/2023","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":47,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":511,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Broken Download Link for TB-96AIOT-1126CE Debian OS","id":1340,"title":"Broken Download Link for TB-96AIOT-1126CE Debian OS","slug":"broken-download-link-for-tb-96aiot-1126ce-debian-os","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-08-11T11:00:20.608Z","last_posted_at":"2026-08-11T11:00:21.304Z","bumped":true,"bumped_at":"2026-08-11T11:00:21.304Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am writing to report a broken download link on your official documentation website. \nOn the TB-96AIOT-1126CE downloads page ( Downloads for TB-96AIOT-1126CE - 96Boards ), the OneDrive link provided for downloading the D…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":39,"like_count":0,"has_summary":false,"last_poster_username":"asdem","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":513,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"IMU N100 acceleration issues","id":1335,"title":"IMU N100 acceleration issues","slug":"imu-n100-acceleration-issues","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://forum.youyeetoo.com/uploads/default/optimized/2X/f/f660a15adcc2638f89e00eb0b4f94256735e9275_2_1024x733.jpeg","created_at":"2026-06-08T10:51:02.416Z","last_posted_at":"2026-06-08T15:49:12.392Z","bumped":true,"bumped_at":"2026-06-08T15:49:12.392Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a problem where the imu is showing acceleration in X and Y direction even if the imu is completely stationary. I found out that when I placed the IMU on flat ground and rotating it around z-axis (Yaw). The valuse …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":65,"like_count":0,"has_summary":false,"last_poster_username":"abdelrahman_omar","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":502,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Flashing YY3588 from Linux?","id":1334,"title":"Flashing YY3588 from Linux?","slug":"flashing-yy3588-from-linux","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-05-22T17:14:10.318Z","last_posted_at":"2026-05-26T07:16:06.240Z","bumped":true,"bumped_at":"2026-05-26T07:16:06.240Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m the happy new owner of a YY3588, but am having trouble finding information about changing the eMMC content so that I can boot it from SD or USB.  I’ve read a few similar topics, but they resort to making use of a win…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":101,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":501,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lidar for fast contact object on wall, Looking for recommendations","id":1332,"title":"Lidar for fast contact object on wall, Looking for recommendations","slug":"lidar-for-fast-contact-object-on-wall-looking-for-recommendations","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-04-26T07:42:16.931Z","last_posted_at":"2026-04-29T13:47:56.637Z","bumped":true,"bumped_at":"2026-04-29T13:47:56.637Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, need advise on the least expensive option capable of detecting a ball hitting a wall not sure \nif the (or maybe two?) RP C1 is good enough for that, yes/no? why? what would be my other options in prize? this is for a…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":58,"like_count":0,"has_summary":false,"last_poster_username":"Parsec3d","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":498,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"X8390ABV4/MT8390 BSP and schematics","id":1324,"title":"X8390ABV4/MT8390 BSP and schematics","slug":"x8390abv4-mt8390-bsp-and-schematics","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-05T19:13:09.393Z","last_posted_at":"2026-04-07T01:22:04.219Z","bumped":true,"bumped_at":"2026-04-07T01:22:04.219Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello. \nI purchased and received the X8390ABV4/MT8390 but there doesn’t seem to be any information on the BSP or schematics for the board. \nCan the community provides the necessary pointers ?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":31,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":494,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"AIOT RK3588A Full firmware","id":1306,"title":"AIOT RK3588A Full firmware","slug":"aiot-rk3588a-full-firmware","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2025-11-04T12:04:19.282Z","last_posted_at":"2025-11-04T12:04:19.618Z","bumped":true,"bumped_at":"2025-11-04T12:04:19.618Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an AIOT RK3588A and I need the firmware to enable the vByone port. Can someone send me the link to download the full firmware?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":44,"like_count":0,"has_summary":false,"last_poster_username":"Franco","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":483,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FLASCH ENC1V2 recovery","id":1301,"title":"FLASCH ENC1V2 recovery","slug":"flasch-enc1v2-recovery","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2025-10-03T14:59:26.596Z","last_posted_at":"2025-10-03T14:59:26.699Z","bumped":true,"bumped_at":"2025-10-03T16:44:19.869Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"FLASCH ENC1V2 recovery. Good morning, due to an incorrect firmware downgrade, my LinkPi Enc1V2 freezes at the initial logo. It won’t allow any updates, not even using the USB procedure with the DEF button reset. Is it po…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["linkpi"],"tags_descriptions":{},"views":82,"like_count":0,"has_summary":false,"last_poster_username":"Digicontrol","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":101,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lidar user manual needed","id":1297,"title":"Lidar user manual needed","slug":"lidar-user-manual-needed","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-09-19T17:21:12.090Z","last_posted_at":"2025-09-24T01:40:41.926Z","bumped":true,"bumped_at":"2025-09-24T01:40:41.926Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a CS20 lidar transmitter for a drone. It is labelled XYDPCS20001 Is there a user manual for this lidar transmitter? \nThank you \nDonF","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":23,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":478,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Youyeetoo RGBD TOF camera","id":1281,"title":"Youyeetoo RGBD TOF camera","slug":"youyeetoo-rgbd-tof-camera","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2025-07-30T18:27:47.493Z","last_posted_at":"2025-07-31T15:15:01.453Z","bumped":true,"bumped_at":"2025-07-31T15:15:01.453Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nis the CS30 camera related to Synexens CS30 camera? They seem to have very similar specs. Is it a rebranded productt?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["depth-camera"],"tags_descriptions":{},"views":53,"like_count":0,"has_summary":false,"last_poster_username":"YuriRzhanov","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":470,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Replacement screws for Banana PI R3 case","id":1272,"title":"Replacement screws for Banana PI R3 case","slug":"replacement-screws-for-banana-pi-r3-case","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-07-22T02:42:17.863Z","last_posted_at":"2025-07-23T06:05:37.543Z","bumped":true,"bumped_at":"2025-07-23T06:05:37.543Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello. Is it possible to buy a set of screws for the Bpi R3 metal case? If so how? \nWhile working on the device I managed to lose the screws for the case. I can’t find anyone locally that stocks that particular size scre…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":24,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":465,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FHL-D435i ROS Library ARM64","id":1207,"title":"FHL-D435i ROS Library ARM64","slug":"fhl-d435i-ros-library-arm64","posts_count":8,"reply_count":5,"highest_post_number":8,"image_url":null,"created_at":"2025-04-17T14:25:21.915Z","last_posted_at":"2025-04-23T08:24:21.927Z","bumped":true,"bumped_at":"2025-04-23T08:24:21.927Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I’m using your FHL-D435i camera for a company project, but unfortunately I have a lot of problems working in an ARM64 environment with ROS because not all the dependent libraries are compiled for ARM64, can you suppo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["Jetson-Nano"],"tags_descriptions":{},"views":129,"like_count":0,"has_summary":false,"last_poster_username":"dadopts","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":273,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to switch between UART and IIC communication modes of the TFMINI-S","id":1196,"title":"How to switch between UART and IIC communication modes of the TFMINI-S","slug":"how-to-switch-between-uart-and-iic-communication-modes-of-the-tfmini-s","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://forum.youyeetoo.com/uploads/default/original/2X/3/3f0818e5cee9251d80efb66e6cb1007b17205b58.png","created_at":"2025-03-31T01:27:45.539Z","last_posted_at":"2025-03-31T01:27:45.628Z","bumped":true,"bumped_at":"2025-03-31T01:27:45.628Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Here’s how to switch between UART and IIC communication modes for the TFmini-S: \nSwitching to IIC Mode\n\nConnect the Device: Use a USB-to-UART converter to connect the TFmini-S to your PC.\nOpen Serial Assistant: Select th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":60,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LD20 - Raspberry pi 3b+","id":966,"title":"LD20 - Raspberry pi 3b+","slug":"ld20-raspberry-pi-3b","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2025-01-31T05:12:00.985Z","last_posted_at":"2025-02-06T00:36:28.929Z","bumped":true,"bumped_at":"2025-02-06T00:36:28.929Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, I’ve been trying to set up the LD20 on my raspberry pi 3b+. I have been following the directions from the wiki: \nhttps://wiki.youyeetoo.com/en/Lidar/LD20 \nand I am currently on step 3.3.5: “Run the program”. After…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":132,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":336,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LD-19 Plus not working with ROS2 Humble","id":929,"title":"LD-19 Plus not working with ROS2 Humble","slug":"ld-19-plus-not-working-with-ros2-humble","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-01-24T19:31:40.251Z","last_posted_at":"2025-01-25T01:05:50.615Z","bumped":true,"bumped_at":"2025-01-25T01:05:50.615Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI recently bought the FHLD19-Plus from Youyeetoo on amazon, and when it arrived it has the STL-27L sticker label on it from LDRobot. I have followed exactly the instructions outlined in the WIKI and README for RO…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["FHL-LD19"],"tags_descriptions":{},"views":207,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":324,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LinkPi Enc1 V3 No streams","id":894,"title":"LinkPi Enc1 V3 No streams","slug":"linkpi-enc1-v3-no-streams","posts_count":9,"reply_count":4,"highest_post_number":9,"image_url":null,"created_at":"2024-12-12T13:33:55.271Z","last_posted_at":"2025-01-02T00:44:59.204Z","bumped":true,"bumped_at":"2025-01-02T00:44:59.204Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is a new unit. Currently running 3.2.0 \nHDMI and Webcam display on the Dashboard screen, as does Network Activity - yellow trace showing about 1Mb/s, black trace showing almost nothing. \nFor any settings, there no s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":332,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":308,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":319,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ENC1_V3 encoder","id":827,"title":"ENC1_V3 encoder","slug":"enc1-v3-encoder","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2024-11-14T00:49:54.374Z","last_posted_at":"2024-11-20T20:15:31.161Z","bumped":true,"bumped_at":"2024-11-20T20:15:31.161Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I bought the ENC1_V3 encoder. I cannot connect to it. The IP address is 192.168.1.217 but my wifi network is 192.168.68.x \nI want to plug in a USB Mic into the encoder. How do I set it up in the dashboard?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":138,"like_count":0,"has_summary":false,"last_poster_username":"Galil","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":153,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":271,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"LD19 returns 503 values and the speed cannot be changed by PWM","id":826,"title":"LD19 returns 503 values and the speed cannot be changed by PWM","slug":"ld19-returns-503-values-and-the-speed-cannot-be-changed-by-pwm","posts_count":7,"reply_count":5,"highest_post_number":7,"image_url":null,"created_at":"2024-11-11T11:30:09.184Z","last_posted_at":"2024-11-15T01:35:44.356Z","bumped":true,"bumped_at":"2024-11-15T01:35:44.356Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, testing this lidar with the software returns 503 points per revolution when in the datasheet it reaches 5000. I can’t change the speed for PWM using an ESP32 either. What am I doing wrong? \nExample code (works wit…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["FHL-LD19"],"tags_descriptions":{},"views":200,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":287,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"FHL-D435i Linux SDK","id":799,"title":"FHL-D435i Linux SDK","slug":"fhl-d435i-linux-sdk","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2024-10-10T13:08:51.737Z","last_posted_at":"2024-10-12T01:39:05.770Z","bumped":true,"bumped_at":"2024-10-12T01:39:05.770Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The link in the wiki of Google Drive have only an old version of the SDK 1.0.0 but the documentation refere to 1.2.0, can repair the link? please \nhttps://wiki.youyeetoo.com/en/camera/D435i \nhttps://drive.google.com/driv…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["Jetson-Nano"],"tags_descriptions":{},"views":281,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":273,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BY52 Mini PC Troubleshooting","id":786,"title":"BY52 Mini PC Troubleshooting","slug":"by52-mini-pc-troubleshooting","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-09-18T02:35:25.353Z","last_posted_at":"2024-09-18T02:35:25.452Z","bumped":true,"bumped_at":"2024-09-18T02:35:25.452Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Please help to offer as much as infomation when regarding to the abnormal over-heating issue. \n\nPlease make sure the cooling fan is working when boot the system.\nPlease descripe your hardware connection(power supply and …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":139,"like_count":0,"has_summary":false,"last_poster_username":"monica","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New member in Youyeetoo","id":777,"title":"New member in Youyeetoo","slug":"new-member-in-youyeetoo","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-09-05T11:00:00.690Z","last_posted_at":"2024-09-05T11:00:00.799Z","bumped":true,"bumped_at":"2024-09-05T11:00:00.799Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nI want to join the YouYeetoo community :slightly_smiling_face:  & I have a keen interest in technology and gaming. I want to connect with like minded individuals, share insights & learn from all of you. \n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":138,"like_count":0,"has_summary":false,"last_poster_username":"inaraghj","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":264,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CM3588 and green led drive lights","id":774,"title":"CM3588 and green led drive lights","slug":"cm3588-and-green-led-drive-lights","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2024-08-29T14:55:23.134Z","last_posted_at":"2024-08-30T03:49:57.748Z","bumped":true,"bumped_at":"2024-08-30T03:49:57.748Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there. \nI installed a CM3588 system and added a new Samsung nvme drive. \nIt all works fine, but when the drive is idle the green led flashes at a very high rate of speed. \nIt does flash on and off as I would expect wh…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":180,"like_count":0,"has_summary":false,"last_poster_username":"richardschoen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":263,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ld19 Hector_slam","id":766,"title":"Ld19 Hector_slam","slug":"ld19-hector-slam","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://forum.youyeetoo.com/uploads/default/optimized/2X/3/333148de1d1404769a96bab3abfc732e72a32130_2_576x1024.jpeg","created_at":"2024-08-23T11:19:55.304Z","last_posted_at":"2024-08-23T11:19:55.401Z","bumped":true,"bumped_at":"2024-08-23T11:19:55.401Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, I recently purchased the LiDAR ld19, and following your instructions . I was able to display the laser in rviz through the command \nroslaunch ldlidar_stl_ros viewer_ld19_noetic.launch \nafter installing hector_slam i …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":136,"like_count":0,"has_summary":false,"last_poster_username":"Space_Max","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":259,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"CRC Table - Missing values?","id":738,"title":"CRC Table - Missing values?","slug":"crc-table-missing-values","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2024-07-13T17:04:36.894Z","last_posted_at":"2024-07-17T00:18:28.390Z","bumped":true,"bumped_at":"2024-07-17T00:18:28.390Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi all! \nI bought the Lidar LD-19, and I want to use the CRC-8 table provided by the manufacturer (FHL-LD19 12Meter Lidar - 30K Lux | youyeetoo wiki). \nThe thing is, the table does not have 256 values. It has only 244 va…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["FHL-LD19"],"tags_descriptions":{},"views":160,"like_count":0,"has_summary":false,"last_poster_username":"kleberpaulo","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":247,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Help Needed to Configure the YouYeetoo AI Development Kit","id":736,"title":"Help Needed to Configure the YouYeetoo AI Development Kit","slug":"help-needed-to-configure-the-youyeetoo-ai-development-kit","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-07-13T10:05:46.402Z","last_posted_at":"2024-07-15T01:25:06.909Z","bumped":true,"bumped_at":"2024-07-15T01:25:06.909Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello Everyone :hugs:, \nWith my recent acquisition of a YouYeetoo AI Development Kit, I can’t wait to get my projects underway. But during the initial setup, I’ve had a few difficulties and could need some advice from th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":163,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":246,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Could you please guide me as a newbie?","id":735,"title":"Could you please guide me as a newbie?","slug":"could-you-please-guide-me-as-a-newbie","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-07-13T05:48:58.910Z","last_posted_at":"2024-07-13T05:48:59.069Z","bumped":true,"bumped_at":"2024-07-13T05:48:59.069Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello there, \nAs a new member in this forum and wish to share and gain some knowledge. I am looking forward to create my own discussion to resolve my query and gain some knowledge though I have taken part in various disc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":117,"like_count":0,"has_summary":false,"last_poster_username":"Kitty05","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":246,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lidar LD-19 Python need plot for moving objects only","id":730,"title":"Lidar LD-19 Python need plot for moving objects only","slug":"lidar-ld-19-python-need-plot-for-moving-objects-only","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2024-07-02T05:50:25.058Z","last_posted_at":"2024-07-03T06:23:02.831Z","bumped":true,"bumped_at":"2024-07-03T06:23:02.831Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI used your sample python code to plot the objects. \nLink : GitHub - halac123b/Visualize-data-from-Lidar-LD19_Matplotlib-Python \nproblem with the code is : It shows a lot of false positives as well. I am trying to l…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":["FHL-LD19","lidar"],"tags_descriptions":{},"views":336,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":243,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Canging Default language on a BY50 mini-computer","id":723,"title":"Canging Default language on a BY50 mini-computer","slug":"canging-default-language-on-a-by50-mini-computer","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-06-21T18:13:33.714Z","last_posted_at":"2024-06-24T00:51:48.107Z","bumped":true,"bumped_at":"2024-06-24T00:51:48.107Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My BY50 mini-computer arrived todaay and it started esily but it h’s default language is a version of Chinese and I do not read Chinese. Hw can I change the default language to English?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":170,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":239,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Youyeetoo R1 SBC - YY3568 Camera and NFC Installation","id":707,"title":"Youyeetoo R1 SBC - YY3568 Camera and NFC Installation","slug":"youyeetoo-r1-sbc-yy3568-camera-and-nfc-installation","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":null,"created_at":"2024-06-01T08:38:32.293Z","last_posted_at":"2024-06-11T01:40:23.782Z","bumped":true,"bumped_at":"2024-06-11T01:40:23.782Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI have a R1 SBC, running Android 13. \n\nI attached the YY3568 camera to port MIPI_CPHv1 and power on the machine. and then i checked;\n\n\nWhen i try to open Camera Application, it did not opened. It could not start.\nI …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":315,"like_count":0,"has_summary":false,"last_poster_username":"CharlesChen","category_id":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":230,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":191,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4,"primary_group_id":null,"flair_group_id":null}]}]}}